We are experiencing increased error rates with our online services and are actively working to resolve them. Please check our Facebook page for periodic updates.

We are currently experiencing a service outage impacting our Cloud, Remote Access, Online Booking, and other online services. We have committed all of our resources to repairing this outage and expect all services to be restored shortly. Please check our Facebook page for periodic updates.

All of our services have been restored after a brief interruption that impacted our Cloud, Remote Access, Online Booking, and other online services. This interruption occurred between 9:30 p.m. and 11 p.m. EST on April 10th. Thank you for your patience!

Epson Receipt Printer Setup

These instructions will help you install drivers for Epson receipt printers and configure them to work properly with your DaySmart software.

Install Printer Drivers
Drivers are required for your printer to communicate with Windows and your software.
  1. Unplug the printer from the computer if it is not already.
  2. Click here to download the Epson driver directly from our website.
  3. Run the installer once it finishes downloading. This may take a minute.
  4. Click Next on the InstallShield Wizard welcome screen.
  5. Accept the license agreement terms on the next screen and click Next.
  6. Choose the Standard radio bubble and click Next.
  7. Choose Add on the right.
  8. Select your printer model from the Select Driver pull-down menu. Refer to the label, literature, or packaging for your printer to determine the correct driver to install. If you purchased the printer from DaySmart Software, it will likely be TM-T88III, TM-T88IV, or TM-T88V. If you have a TM-T88IV, be sure to choose Receipt and NOT ReStick.
  9. Make sure the installer chooses Create a USB port automatically. If it does not, change it to that option from the Port Type pull-down menu.
  10. Click Next.
  11. Click Next.
  12. Click Next. The installer will begin installing the driver files. This may take several minutes.
  13. Click Finish once the installation is complete.
Connect Your Printer
Now that the requisite drivers are installed, the device should be ready to communicate with both Windows and your software.
  1. Plug the device into any open USB port on your computer.
  2. Windows will recognize and configure your device. This may take a minute.
  3. In your DaySmart software, grab the Tools pull-down menu and select Options.
  4. Select the Hardware Setup tab and click the Configure Receipt Printer button.
  5. In the Settings section, choose the Use standard full-size Windows printer or USB receipt printer radio bubble.
  6. Click Select on the right and choose your Epson receipt printer. Click OK.
  7. Click the Print Test Receipt button and follow the prompts to print a test receipt.
  8. When the receipt prints successfully, click OK in the Receipt Printer Setup window and return to using your software. The receipt printer is now properly configured to work with your software.
If you experience problems using your printer under normal operating conditions or have trouble printing a test receipt after following these instructions, refer to vendor specific support literature or the manufacturer's support resources.

Did you find this article helpful?